Message
Applications:
※Car steering system, transmission gear, idle speed motor, shock absorber seal,
※Long-life lubrication between rubber seals and metal parts of pneumatic equipment and pneumatic brakes;
※Long-term lubrication of plastic/plastic, plastic/metal, metal/rubber parts and sliding bearings at low or wide temperatures;
Performance characteristics:
※Excellent water and corrosion resistance, compatible with most plastics and elastomers;
※Excellent anti-oxidation stability and thermal stability, with extremely long service life;
※Excellent low temperature, low starting torque, wide operating temperature range;
※Very low volatility and diffusivity, small friction coefficient.
index parameter:
project | parameter | Test accuracy | |
Exterior | White bright ointment | Visual inspection | |
Operating temperature range（℃） | -40～200 | -- | |
Cone penetration 1/10mm | 295～325 | ASTM D-217 | |
NLGI grade | 1～2 | ASTM D-217 | |
density 25℃ | 1.0 | ASTM D-1480 | |
Drop point ℃ greater than | 220 | ASTM D-2265 | |
Oil separation 24h 100℃ | <1.5% | FTM 791B,321、2 | |
Volatility 24h 100℃ | <0.05% | ASTM D-972 | |
Water resistance test 60mm 40℃ | 2.3% | ASTM D-1264 | |
Resistance to copper corrosion24h 、100℃ | 1A | ASTM D-4048 | |
Four ball test (60min 、1200rpm 、392N) | —（75℃） | ASTM D-D2266 | |
— （150℃） | |||
Low temperature torque（-40℃）gm-cm | start up | — | ASTM D-1478 |
Run 10min | — | ||
Run 60min | — | ||
Antioxidant performance 168h、100℃ | 10.2KPa | ASTM D-942 | |
Antirust test | — | ASTM D-1743 | |
（The above data is for reference only and does not have the nature of a contract.）
Please fill in your message, we will reply as soon as possible!
